RonaBond Concrete Repair Mortar is a prepacked, ready to use mortar for concrete repair and is used with Ronacrete Standard Primer which gives monolithic adhesion to all correctly prepared surfaces. RonaBond Concrete Repair Mortar is used to repair and replace concrete damaged as a result of spalling through reinforcement corrosion, freeze/thaw cycling, impact or other damage.
Admixture for mixing with cement and fine aggregates for concrete repair and for the construction of waterproofing and tanking renders. Various mix designs are available depending upon the application.
Admixture for mixing with cement and fine aggregates for concrete repair and for the construction of waterproofing and tanking renders. Various mix designs are available depending upon the application.
Admixture for mixing with cement and fine aggregates for concrete repair and for the construction of waterproofing and tanking renders. Various mix designs are available depending upon the application.
A pre-packed render for application to vertical and overhead surfaces and screed for horizontal surfaces. Suitable for waterproofing and tanking applications.
Ronafix Pre-packed Screed 6-50mm is a prepacked polymer modified mortar for thin section, high strength, waterproof bonded screeds from 6mm thick, for installation in stations (surface and below ground) and depots.
Ronafix Pre-packed Screed 25mm+ is a prepacked polymer modified mortar for thin section, high strength, waterproof bonded screeds from 25mm thick, for installation in stations (surface and below ground) and depots.
This product is a pre-bagged, water based, polymer modified mortar for producing waterproofing renders that can resist positive and negative pressure.
Ronafix Pre-packed Wearing Screed 15-25mm is a prepacked polymer modified mortar for thin section, high strength, waterproof bonded wearing screeds, minimum depth 15mm, for installation in stations (surface and below ground) and depots.
Ronafix Pre-packed Wearing Screed 25mm+ is a high strength prepacked polymer modified mortar for thin section, high strength, waterproof bonded wearing screeds of minimum depth 25mm, for installation in stations (surface and below ground) and depots.
A pre-packed, ultra rapid hardening mortar for floor repairs, suitable for use in stations, above and below ground.
A pre-packed, ultra rapid hardening mortar for floor repairs that is suitable for use in stations, above and below ground.
RonaScreed Mortar and Concrete are rapid strength gain mortar and fine concrete for laying floor toppings, repairing floor surfaces and rapid set concrete applications.
A liquid applied, damp proof membrane for suppressing residual moisture in concrete floors and for reducing water vapour transmission.
RonaScreed Mortar and Concrete are rapid strength gain mortar and fine concrete for laying floor toppings, repairing floor surfaces and rapid set concrete applications.
RonaScreed FastDry Prompt – benefits and drying
RonaScreed FastDry Prompt (formerly RonaScreed 8 Day Overlay) is so-called because it is a fast-drying screed additive which enables a 50mm thickness of 3:1 sand/ cement screed to be overlaid with moi ...
Read more
BS 8204-1 “Concrete bases and cementitious levelling screeds to receive floorings — Code of practice” section 6.11.1 suggests the following calculation for drying of screeds with no fast drying additi ...
Read more
Avoidance/ Mitigation Of The Effects Of Common Forms Of Cracking In Cementitious Screeds
Aggregate is usually 0–4 mm and is mixed with cement in the ratio of 1:3 or 1:4 cement to sand, depending on strength requirements and drying requirements. For total screed thicknesses in excess of 50 ...
Read moreHere to help...
