Features and Benefits
RonaDeck Drive Base is an alternative to concrete and asphalt concrete in the build-up for driveways and pathways to be surfaced with resin bound surfacing. The epoxy formulation of RonaDeck Drive Base allows for wet aggregates to be used. RonaDeck Drive Base is ideally overlaid with a polyurethane based resin bound surfacing system after 24 hours (@ 200C), for improved chemical bond and reduced contamination between layers.
The RonaDeck Drive Base system is designed for foot traffic and light vehicle traffic on domestic driveways. It is not designed for road surfacing or for car parks.
RonaDeck Drive Base Mix Design
RonaDeck Drive Base Resin 6kg
Washed 6-10mm aggregate 100kg
Coverage @ 35mm 1.88m² (approx.)
Coverage is based on application to a smooth flat surface and will vary when applied to undulating surfaces, according to compaction, and to the aggregate grading, which can change from batch to batch.
RonaScreed FastDry Prompt – benefits and drying
RonaScreed FastDry Prompt (formerly RonaScreed 8 Day Overlay) is so-called because it is a fast-drying screed additive which enables a 50mm thickness of 3:1 sand/ cement screed to be overlaid with moi ...
Read more
BS 8204-1 “Concrete bases and cementitious levelling screeds to receive floorings — Code of practice” section 6.11.1 suggests the following calculation for drying of screeds with no fast drying additi ...
Read more
Avoidance/ Mitigation Of The Effects Of Common Forms Of Cracking In Cementitious Screeds
Aggregate is usually 0–4 mm and is mixed with cement in the ratio of 1:3 or 1:4 cement to sand, depending on strength requirements and drying requirements. For total screed thicknesses in excess of 50 ...
Read moreHere to help...
