Available to purchase online @ ronacreteshop.co.uk Visit the store

Rapid drying additive for underfloor heating screeds


RonaScreed Fast Drying Underfloor Heating Screed Additive is an additive for site batched screeds is used to quickly reduce the level of retained moisture within the screed allowing floor coverings to be laid over the screed much sooner than with conventional screeds. It also promotes high early strength, permitting early access by following trades.


RonaScreed Fast Drying Underfloor Heating Screed Additive is supplied in concentrated form and used in low dilution. It provides rapid drying and early laying of floor coverings such as sheet vinyl, tiles, carpet etc. When laying onto insulation the minimum screed thickness is 65mm. Heating pipes require a minimum cover of only 30mm of screed. RonaScreed Fast Drying Underfloor Heating Screed Additive must be applied by competent screeding contractors.

    Quick Question?

    Our Product range

    RonaScreed FastDry Prompt – benefits and drying

    RonaScreed FastDry Prompt (formerly RonaScreed 8 Day Overlay) is so-called because it is a fast-drying screed additive which enables a 50mm thickness of 3:1 sand/ cement screed to be overlaid with moi ...

    Read more

    Drying of Screeds

    BS 8204-1 “Concrete bases and cementitious levelling screeds to receive floorings — Code of practice” section 6.11.1 suggests the following calculation for drying of screeds with no fast drying additi ...

    Read more

    Avoidance/ Mitigation Of The Effects Of Common Forms Of Cracking In Cementitious Screeds

    Aggregate is usually 0–4 mm and is mixed with cement in the ratio of 1:3 or 1:4 cement to sand, depending on strength requirements and drying requirements. For total screed thicknesses in excess of 50 ...

    Read more

    Here to help...