Features and Benefits
RonaScreed Flowable Topping is a flow applied wearing screed for residential, commercial and light industrial areas. It provides a hard, durable wearing surface which may also receive various floor finishes. The material gains strength quickly and can be accessed by foot traffic in as little as 2 hours.
| Use | Wearing Screed |
| Water addition per 20kg | 3.5-4.0 litres |
| Workability | 20-30 minutes |
| Foot traffic @ 20°C | 2 hours |
| Application thickness (min / max) | 5mm/50mm |
| Pack Size | 20kg |
| Compressive strength @ 28 days | 44N/mm² |
| Flexural strength @ 28 days | 8N/mm² |
Results shown are from samples mixed, conditioned and tested in ideal laboratory conditions (20oC, 65% RH). Site results will be lower. Drying times may be longer. When opening to foot traffic do not subject to potential impact damage for 14 days @ 20°C.
For full information about RonaScreed Flowable Topping, please refer to the Technical Data Sheet.
RonaScreed FastDry Prompt – benefits and drying
RonaScreed FastDry Prompt (formerly RonaScreed 8 Day Overlay) is so-called because it is a fast-drying screed additive which enables a 50mm thickness of 3:1 sand/ cement screed to be overlaid with moi ...
Read more
BS 8204-1 “Concrete bases and cementitious levelling screeds to receive floorings — Code of practice” section 6.11.1 suggests the following calculation for drying of screeds with no fast drying additi ...
Read more
Avoidance/ Mitigation Of The Effects Of Common Forms Of Cracking In Cementitious Screeds
Aggregate is usually 0–4 mm and is mixed with cement in the ratio of 1:3 or 1:4 cement to sand, depending on strength requirements and drying requirements. For total screed thicknesses in excess of 50 ...
Read moreHere to help...
